Soitinaseman efektipedaalisarja jatkuu. Esittelyssä nyt NUX NBP-5 Melvin Lee Davis bassoefekti etuaste / DI boxi.

Soitinaseman efektipedaalisarja jatkuu!

Esittelyssä nyt NUX NBP-5 Melvin Lee Davis bassoefekti etuaste / DI boxi. NUX kehitti basso- ja musiikkilegenda Melvin Lee Davisin kanssa bassoefektin. Tässä uudessa Melvinin nimeä kantavassa pedaalissa on kahdeksan bassokaappimallennusta, drive, sisäänrakennettu äänikortti tietokoneeseen liittämistä ja äänityksiä varten, DI sekä kuulokeliitäntä. Eli kaikki mitä tarvitset harjoituksiin, keikoille ja äänityksiä varten.

Otetaan pedaali lähempään tarkasteluun:Tämä bassopedaali on Melvin Lee Davisin signature bassoetuvahvistin / DI boxi joka tarjoaa samassa paketissa 4, 5, 6. 7 kielisille bassoille laajan skaalan taajuuskorjauksen ja hyvät säädöt puhtaan tai säröisen soundin luomiseksi. Monet nykybasistit käyttävät pelkkää bassovahvistinsimulaatiopedaalia bassosoundinsa tuottamiseen. Pedaali suoraan PA-systeemiin kiinni ja soundi on niin kuin bassosoundin pitää ollakin.Voimakkuuden säätönuppiSäätää kokonaisvaltaisesti pedaalin voimakkuutta. Ideaalinen puhtaan äänen säätöön. Vaikuttaa myös DI ulostulon voimakkuuteen.Blend säätönuppi.Säätää balanssin puhtaan ja särösignaalin välillä.Drive säätönappula.Säätää yliohjatun/särö signaalin dynamiikan. 

Videoesittely: https://youtu.be/DiwP8rRMRcI3-Band Equalizer with Middle Frequency SelectorBass : +/- 12dB @40HzMiddle : +/- 17dB @160Hz to 1000HzFreq. : 160Hz ~ 1000HzTreble : +/- 12dB @8000HzDI OutputBalanced XLR Output carrying the mic-level output signal, either affected or unaffected depending on the Pre-Post switch.GND LFT (Ground / Lift) Toggle SwitchDisconnects the signal ground on the DI out to break any ground loops. Toggle the switch to the LESS noisy position; it can be either GND or LFT depending on the room, stage or studio condition. Switch does not effect the 1/4-inch (6.5mm) output.Impulse Response (IR) Toggle SwitchesYou can activate/deactivate the IR cabinet simulation for both DI out and 1/4-inch (6.5mm) out separately. Use the appropriate IR toggle switch to turn ON/OFF the emulation for the output you choose.Input/Output and USB ConnectionsMain OUT and ThroughYou can use the main "OUT" and "THROUGH" output to get the dry signal for bass amplifier connection. When you activate the "OUT IR" cabinet simulation, you can connect the pedal to any FRFR speaker, directly to a mixer or audio interface. "THROUGH" output will remain bypassed either the "OUT IR" is activated or deactivated.DI Out, Auxiliary Input and Headphone OutputOn the LEFT SIDE of the PEDAL, you can access the XLR output for a mixer and/or audio interface connection, and you have the option of activating the IR cabinet simulation. There is a 1/8-inch (3.5mm) auxiliary input to connect a music player, and headphones output for silent practicing or monitoring (please check the USB connection). Headphone output is related to DI out, when you activate the DI IR simulation, headphones output will be simulated.NUX Bass Preamp + DI SoftwareYou can connect the pedal to your Windows / MAC computer to use the editor software. You can load your own IR files and control various other settings.Supported IR file: 48 kHz / 24-bit, 1024 SamplesBass Amplifier ModelsMLD Bass Preamp + DI pedal comes with 2 amplifier models, you can select and control the amps and the Noise Reduction on the software easily. There will be more amp models released . . . stay tuned !Speaker Cabinet Models (IR)There are 8 IR presets (4 factory / 4 user) in the Melvin Lee Davis Bass Preamp + DI, and the pedal comes with the selection of speaker cabinet IR files created by NUX. Also there is an independent volume control for the cabinet simulation to adjust the IR level.Recording With Melvin Lee Davis Bass PreampYou can record your bass guitar without using any audio interface. MLD Bass Preamp + DI has a built-in audio streaming function, so you can connect the pedal directly to your computer with a Micro B USB cable, and it is ready to play and record. A driver free* solution that helps you to produce music with direct connection. You can use the headphones output for monitoring, you will hear both your guitar and the audio from your computer.PLEASE NOTE: Run the audio recording software first, then run the MLD Bass Preamp Editor Software to use it properly.Features:24-bit, 48KhzImpulse Response: 1024 length (20.33ms)Latency: 1ms3-band EQ with Middle-frequency selectorDrive with blend controlBuilt-in noise reductionImpulse Response loader, speaker cabinet simulation1/4” instrument input1/4” through output and main outputXLR DI output1/8” headphone output1/8” Auxillary in for music player connectionMicro B USB input for firmware update, software control, IR loading, and audio stream